SuperCling LTR: is designed for short and long term applications on glass or other glossy surfaces but also for use on surfaces such as metals, woods, plastics, and most smooth wall surfaces. LTR’s unique premium adhesive is designed for controlled tack (limited growth) for easy long-term removability (up to 6 months) without leaving residue. SuperCling is used for point-of-purchase advertising, promotional items, seasonal decals, protective layering and many more applications that need a more aggressive adhesion that cling vinyl film.

4mil Clear SuperCling adhesive is intended for applications that require see-beyond clarity. It does provide excellent contact clarity (surfaces to which it is applied show through clearly). The clear also provides excellent contact clarity (surfaces to which it is applied show through clearly). 4mil Clear is ideal for storefront window applications, beer cooler signage, etc.

White SuperCling LTR is available in a 4mil & 6mil thickness and has a 90# lay-flat liner.
We highly recommend testing adhesion of printed SuperCling pieces to your wall surfaces, especially if it has a laminate.

54” wide master roll stock – Available in rolls and sheets

Product Description:

		Clear Supercling LTR	White Supercling LTR
Face Stock :		4 mil clear vinyl	4 & 6 mil white matte vinyl
Adhesive :		Premium removable	Premium removable
Release Liner :		90lb / 7mil lay flat	90lb / 7mil lay flat
Surface Energy :		36 dynes/cm	36 dynes/cm
App Temp. :		35° F minimum	35° F minimum
Service Temp :		-10 / +120° F	-10 / +120° F
Shelf Life :		2 Years	2 Years
Removability :		6 months clear	6 months clear

White SuperCling LTR is available in a 4mil & 6mil thickness and has a 90# lay-flat liner. We highly recommend testing adhesion of printed SuperCling pieces to your wall surfaces, especially if it has a laminate. 54” wide master roll stock – Available in rolls and sheets

Print Application: Non-topcoated PS vinyl is suitable for printing by Screen printing, UV offset lithography, UV flexography, Solvent Digital Ink Jet & UV Curable printing (Flat bed printers) and the HP LATEX solvent printer A Matte Top-Coating for the white is available for Conventional Litho printing.

Recommendation: For Wall applications, completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in PLA film and Adhesive Degradation. Applications involving die or kiss cutting and a print bleed to the edge is especially important to let sit and evaporate for at least 24 hours.

FOR YOUR PROTECTION: Customers/users assume all risks resulting from the use of our products and must confirm the suitability thereof by their own tests. The information and recommendations contained in this publication are, to the best of our knowledge, reliable. Suggestions made concerning uses or applications are only the opinion of Plastiprint. They are provided as a guide only and shall in no event constitute a warranty of any kind. Final product must be approved by end user, especially if printed.