3.5mil WHITE POLYPROPYLENE CLING FILM
(Non-Adhesive Film)
PVC-Free Cling Film can be cleanly removed and
re-applied and leaves no adhesive residue behind on the applied surface
because there is no adhesive. The non adhesive cling formula makes
application or installation extremely easy and quick. The film clings
tightly to most clean polished surfaces like a static cling vinyl but is
easier to apply due to the rigidity of the film. Also, the polypropylene
construction makes it more eco-friendly than cling PVC vinyl. PVC-Free
Cling is the next generation of window cling films.
CONSTRUCTION:
3.5mil White Polypropylene film coated with a cling coating.
Laminated to a 138# liner
APPLICATION:
This product is designed as an easily installable
cling film for advertising graphics, P.O.P. window signage, decal
signage, seasonal window graphics, protective film purposes or process
aid for low strength materials. This film will remove easily without
damaging the substrate or surface.
PHYSICAL
PROPERTIES:
Application Temperature
60º F to 85° F
Service Temperature
-40º F to 175º F
Dyne Level
44 – 46 Dynes
Recyclability: PVC-Free Cling falls under the same
recyclability category as polypropylene #5.
Size: 54” master roll width. Sheeting and Roll Slitting available.
PREPARATION:
All surfaces must be clean, dry and free of oil, dust, or grease before
application. This is true for re-application as well.
SHELF LIFE:
One year when stored at 72º F at 50% RH.

2 MIL POLYESTER CLING FILM (Non-Adhesive
Film)
PVC-Free Cling can be cleanly removed and
re-applied and leaves no adhesive residue behind on the applied surface
because there is no adhesive. The non adhesive cling formula makes
application or installation extremely easy and quick. The film clings
tightly to most clean polished surfaces like a static cling vinyl but is
easier to apply due to the rigidity of the film. Also, the polyester
construction makes it more eco-friendly than cling PVC vinyl. PVC-Free
cling is the next generation of cling films.
CONSTRUCTION:
2mil
Clear Polyester film coated with a silicone cling coating.
Laminated to a matte clear liner
APPLICATION:
This product is designed as an easily installable
cling film for advertising graphics, P.O.P. window signage, decal
signage, seasonal window graphics, protective film purposes or process
aid for low strength materials. It can be laminated to a wide
variety of smooth materials offering excellent clarity. This film
will remove easily without damaging the substrate or surface. It can
also be used in higher heat applications than PVC vinyl cling.
PHYSICAL PROPERTIES:
Functional Coating Thickness
<0.2 mils nominal
Film Thickness
.002
Adhesion - 180 peel to #304 SS
>3.5(oz/in. width)
Application Temperature
60º F to 85
Service Temperature
-40º F to 300º F
Dyne Level
44 – 46 Dynes (6 months)
Recyclability: Falls under the same recyclability
category as PET.
Printer Compatibility:
Screen Printing, UV Curable digital, Litho printing
PREPARATION:
All surfaces must be clean, dry and free of oil, dust, or grease before
application. This is true for re-application as well.
SHELF LIFE:
6 months when stored at 72º F at 50% RH.
NOTE:
Published material and information concerning Plastiprint Sales Co.
products are based upon research which the company believes to be
reliable, but such material and information does not constitute a
warranty. Because of the variety of possible uses for Plastiprint Sales
Co. and the continuing development of new uses, the buyer should
carefully consider the fitness and performance of the product for each
intended use and the buyer assumes all risks in connection with such
use.