Flexo Top-Coated Static Cling Vinyl   

Top-Coated Static Cling Vinyl for Water-based Flexographic Printing

General Description: Plasticling Static Cling Vinyl can be removed and re-applied, removes cleanly and leaves no adhesive residue. A highly plasticized, calendared, flexible, adhesive-free PVC film laminated to a release liner. Plasticling Static Cling Vinyl clings tightly to most clean polished surfaces.

Product Description: The film is available in thicknesses of 6.0 and 7.0 mils. Available in clear & white. Other thicknesses and colors available upon special request (minimum quantities may apply). Thickness tolerance: +/- 10%. Dimensional stability: - 3% (50° C x 10 minutes).
White, Poly-coated liners are available in standard 70#, 90# and 112# (8pt.) thickness. Other liner colors, types and thicknesses available upon request (minimum quantities may apply).

Vinyls:

6-mil economy vinyl: 6-mil vinyl has slightly better adhesion than 6.0-mil vinyl, but with slightly more apparent flow lines (optical distortion). Good for price sensitive applications and where longer rolls are desirable while limiting weight and roll diameter. Available in clear & white.

7-mil standard vinyl: Considered the industry standard, available in clear only.

Liners:

70# Poly-coated liner: Designed for Roll Fed print applications.

90# Poly-coated liner: Designed for Roll Fed & Roll to Sheet applications that need sheeting after printing.

112# (8-pt.) liner: 8-point white, Poly-coated paper board liner with printable backside. Good lay-flat and economy for applications with limited ink coverage.

Print Applications: Top-coated Static cling vinyl is suitable for printing with the water-based Flexography, Thermal Transfer printing and Screen printing.

Roll Slitting available

FOR YOUR PROTECTION: Customers/users assume all risks resulting from the use of our products and must confirm the suitability thereof by their own tests. The information and recommendations contained in this publication are, to the best of our knowledge, reliable. Suggestions made concerning uses or applications are only the opinion of Plastiprint. They are provided as a guide only and shall in no event constitute a warranty of any kind. Final product must be approved by end user, especially if printed.